HP ProLiant BL495c G6 Server Blade

Brand: Hewlett-Packard
Product Code: HP-BL495c-G6
Availability: 5

Price: Rs. 25,000

Available Options


* Processor:



* RAM:









RAID Level:



* Solid State Drives:

Storage Adaptors:



Network Adaptors:



Operating System:




* Warranty:





* Delivery Services:




* Special Instructions:

 

Overview

 

HP ProLiant BL495c Generation 6 (G6) Server Blade

 
HP ProLiant BL495c Generation 6 (G6) Server Blade
1.
Access panel
5.
Local I/O connector
2.
Two (2) mezzanine I/O expansion slots
6.
Sixteen (16) PC2-5300 Registered DIMM (DDR2-667) or PC2-6400 Registered DIMM (DDR2-800) memory slots
3.
Embedded dual port Flex-10 10GbE multifunction server adapter
7.
Internal USB connector
4.
Up to two (2) AMD Opteron™ 2400 Series processors    

What's New
  • Support for HP NC553m 10Gb 2-port FlexFabric Adapter

At A Glance

This document covers the HP ProLiant BL495c G6 server blade only. For more information on HP BladeSystem c-Class Enclosure and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following QuickSpecs:

The HP ProLiant BL495c G6 Server Blade virtualization blade eliminates the performance bottlenecks of a virtual machine host. Engineered with more memory and I/O than any other half-height blade server, this world's first virtualization blade maximizes the number and performance of VMs that you can deploy per blade.

HP ProLiant BL495c G6 server blade includes:

  • Processor:
    • Up to two (2) Six-Core AMD Opteron™ 2400 series processors
    • Supports up to 2.6 GHz, 2.2 GHz HyperTransport™; 512 KB Level 2 cache memory per core; 6 MB Level 3 cache
    • Dual-Link AMD HyperTransport connection between processors for maximum performance
    • AMD Dual Dynamic Power Management™ for optimum performance and reduced power consumption
    • ServerWorks HT-1000 and HT-2100 chipsets
  • BL495c G6 Memory:
    • Up to 128 GB of memory, supported by sixteen (16) slots of PC2-5300 Registered DIMMs at 667MHz or 64GB of memory, supported by sixteen (16) slots of PC2-6400 Registered DIMMs at 800MHz
    • Supporting memory interleaving (2:1)
      NOTE: The memory bus will operate at 800 MHz with four (4) or fewer DIMMs per processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz with eight (8) DIMMs per processor.
  • Storage Controller:
    • HP Embedded SATA Controller
      NOTE: RAID functionality requires the use of an optional Smart Array mezzanine card. See the Storage Controller options section below.
  • Internal Drive Support:
    • Up to two (2) non-hot plug SATA Solid State Drives (SSD)
    • With an attached SB40c Storage Blade, up to six (6) hot plug SFF Serial Attached SCSI (SAS) or SATA Hard Drives (optional)
  • Network Controller:
    • Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter
      NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module. Learn more at:www.hp.com/go/virtualconnect. 
      NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate with 1Gb HP BladeSystem c-Class interconnect components.
    • One (1) additional 10/100 server adapter dedicated to iLO 2 Management
  • Mezzanine Support:
    • Two (2) I/O expansion mezzanine slots
    • Supports up to two (2) mezzanine cards
      • Dual-Port FlexFabric Adapter mezzanine option
      • Dual-Port Fibre Channel Mezzanine options for SAN connectivity
      • iSCSI Ethernet mezzanine option for optimized iSCSI connectivity
      • Ethernet server adapter mezzanine options for additional network ports
      • 4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency server interconnectivity (based on Mellanox technology)
      • I/O Accelerator mezzanine options for high transaction rate local storage
      • SAS mezzanine option for external direct attach and shared SAS storage
  • Internal USB Support:
    • One (1) internal USB 2.0 connector for security key devices and USB drive keys
  • Form Factor:
    • HP ProLiant BL495c G6 server blade plugs into the BladeSystem c3000 and c7000 enclosures
  • Infrastructure Management:
    • This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
    • HP Integrated Lights-Out 2 management processor for simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration.
    • HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control supports both Windows and Linux-based central management servers.
    • HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's changing business requirements.
  • Operating Systems and Virtualization Software:
    • Supports Windows, RHEL, SLES, VMware ESX, Citrix XenServer
  • Enclosures:
    • HP offers three different c-Class server blade enclosures to meet your individual needs:
      • The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant BL495c G6 servers plugged vertically.
      • The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP ProLiant BL495c G6 servers plugged horizontally.
    • Server blades, storage blades, and interconnect modules are all designed to fit into the c7000 and c3000 enclosures.
    • For additional enclosure information, please see: http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
  • Warranty:
    • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard Drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. 
      NOTE: Server warranty includes 3-year Parts, 3- year Labor, 3-year on-site support. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
Manufacturer
Manufacturer HP
Product Type
Product Type Blade Server
Form Factor
Form Factor Blade Server
Platform
Platform LINUX, Windows
Announced
Announced 2-Jun-09
Available
Available 2-Jun-09
Archived
Archived 13-Jan-11
Architecture
Architecture x86
Rack Units
Rack Units Not Applicable
Blade size
Blade size Half-height
Operating System
Operating System Red Hat Linux, SUSE Linux, Windows
Processor Family
Processor Family Opteron
Processor Options
Processor Options Opteron 2425 HE (2.1GHz 55W ACP) Opteron 2427 (2.2GHz 75W ACP) Opteron 2435 (2.6GHz 75W ACP)
Max Processor Chips
Max Processor Chips 2
Max Processor Cores
Max Processor Cores 12
Cache
Cache 6MB L3
Chipset
Chipset ServerWorks HT-1000 and HT-2100
Memory Minimum
Memory Minimum 4 GB
Memory Maximum
Memory Maximum 128 GB
Memory Type
Memory Type DDR2 SDRAM
DIMM Type
DIMM Type RDIMM
Memory DIMM Slots Standard
Memory DIMM Slots Standard 16
Max Memory DIMM Slots
Max Memory DIMM Slots 16
Memory Protection
Memory Protection Advanced ECC, Two-way interleaving
Disk Type
Disk Type SATA, Solid State
Disk Controller
Disk Controller Embedded SATA (for connecting to non-hot plug SATA SSD only)
Internal Disk Bays
Internal Disk Bays 2
Bays Information
Bays Information 2 x 2.5" SATA non hot-plug SSD bays
Disk Max Internal
Disk Max Internal 128 GB
RAID Support
RAID Support Optional
Hot-Swap Disks
Hot-Swap Disks None
Media Drive
Media Drive None
I/O Technology
I/O Technology PCI Express
I/O Slot Types
I/O Slot Types 2 x mezzanine slots: _x000D_ 1 x PCI Express x8 _x000D_ 1 x PCI Express x4
I/O Max Slots
I/O Max Slots 2
I/O Internal Slots
I/O Internal Slots 2
Networking
Networking 1 x embedded NC532i dual-port Flex-10 10 Gigabit Ethernet Multifunction server adapter _x000D_ 1 x 10/100 server adapter (dedicated to iLO 2 management)
Dimensions
Dimensions Height: 18.17 cm (7.154 in) Width: 5.56 cm (2.19 in) Depth: 50.95 cm (20.058 in)
Weight
Weight 6.44 kg (14.2 lbs)
Max Power (Calculated)
Max Power (Calculated) 453 W (2,610 CO2e kg pa)
Max Power (Theoretical)
Max Power (Theoretical) Dependent on configuration
Max Heat (Calculated)
Max Heat (Calculated) 1,631 kJ/hr (1,546 Btu/hr)
Max Heat (Theoretical)
Max Heat (Theoretical) Dependent on configuration
Hot-Swap/Redundant Cooling Fans
Hot-Swap/Redundant Cooling Fans Yes (chassis)
Hot-Swap/Redundant Power Supply
Hot-Swap/Redundant Power Supply Yes (chassis)
System Management
System Management Integrated Lights-Out 2 Standard Blade Edition, Insight Control Environment for BladeSystem
Warranty
Warranty 3 Years NBD Onsite 3 Years - Parts, Labor, Onsite Next Business Day response Worldwide

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: