HP ProLiant BL460c G5

HP ProLiant BL460c G5

0 reviews 0 sold. Only 17 remain
₨ 2,500
Product Code: HP-BL460c-G5
Availability: 17
Viewed 4625 times

Available Options

Item specifics

  • Manufacturer HP
  • Model HP - ProLiant BL460c G5
  • Product Type Blade Server
  • Form Factor Blade Server
  • Platform LINUX, Windows
  • Announced 15-Jun-06
  • Available 15-Jun-06
  • Archived 11-May-10
  • Architecture x86
  • Rack Units Not Applicable
  • Blade size Half-height
  • Operating System Solaris, Red Hat Linux, SUSE Linux, Windows
  • Processor Family Xeon
  • Processor Options Xeon E5205 (1.86GHz 65W) Xeon L5240 (3.00GHz 40W) Xeon X5260 (3.33GHz 80W) Xeon X5270 (3.50GHz 80W) Xeon E5345 (2.33GHz 80W) Xeon E5405 (2.00GHz 80W) Xeon E5410 (2.33GHz 80W) Xeon L5410 (2.33GHz 50W) Xeon E5420 (2.50GHz 80W) Xeon L5420 (2.50GHz 50W) Xeon E5430 (2.66GHz 80W) Xeon E5440 (2.83GHz 80W) Xeon E5450 (3.00GHz 80W) Xeon X5450 (3.00GHz 120W) Xeon X5460 (3.16GHz 120W) Xeon X5470 (3.33GHz 120W)
  • Max Processor Chips 2
  • Max Processor Cores 8
  • Cache 6MB L2 (Xeon 5200), 2 x 4MB L2 (Xeon 5300), 2 x 6MB L2 (Xeon 5400) or 8MB L3 (Xeon E5530)
  • Chipset Intel 5000P
  • Memory Minimum 2 GB
  • Memory Maximum 64 GB
  • Memory Type DDR2 SDRAM
  • DIMM Type FB-DIMM
  • Memory DIMM Slots Standard 8
  • Max Memory DIMM Slots 8
  • Memory Protection Advanced ECC, Mirroring, Sparing
  • Disk Type SATA, SAS, Solid State
  • Disk Controller Smart Array E200i
  • Internal Disk Bays 2
  • Bays Information 2 x 2.5" hot-plug drive bays
  • Disk Max Internal 1,000 GB (SATA)
  • RAID Support 0, 1, 1+0; optional 5
  • Hot-Swap Disks SATA, SAS, SSD
  • Media Drive None
  • I/O Technology PCI Express
  • I/O Slot Types 2 x mezzanine slots
  • I/O Max Slots 2
  • I/O Internal Slots 2
  • Networking 2 x embedded NC373i Multifunction Gigabit server adapters with TCP/IP Offload Engine (for Microsoft Windows) _x000D_ 1 x 10/100 NIC (dedicated to iLO 2 management)
  • Dimensions Height: 18.17 cm (7.154 in) Width: 5.61 cm (2.207 in) Depth: 50.95 cm (20.058 in)
  • Weight 6.44 kg (14.2 lbs)
  • Max Power (Calculated) 413 W (2,379 CO2e kg pa)
  • Max Power (Theoretical) Dependent on configuration
  • Max Heat (Calculated) 1,487 kJ/hr (1,409 Btu/hr)
  • Max Heat (Theoretical) Dependent on configuration
  • Hot-Swap/Redundant Cooling Fans Yes (chassis)
  • Hot-Swap/Redundant Power Supply Yes (chassis)
  • System Management Integrated Lights-Out 2 Standard Blade Edition (iLO 2), Virtual KVM(Text and Graphical modes), Virtual Media (CD ROM + floppy and USB flash drive), Virtual Power Button Control Integrated Remote Console Embedded system health Blade power consumption reading Browser + command line and scripted access, Dedicated LAN Connectivity, Automatic IP Configuration via DHCP/DNS/WINS, Industry Standard RC4 128-bit Secure Sockets Layer (SSL) and Secure Shell (SSH) Security, IML and iLO Event Logging _x000D_
  • Warranty 30 Days (Dafault), 1, 2 & 3 Years (Upgradable)

Product Description


HPE ProLiant BL460c G5 Server Blade - Overview


Product description

 
HPE offers powerful, reliable server blades with the same trusted features as award-winning HPE rack and tower servers. With features equal to standard 1U rack mount servers, the new two processor BL460c G5 combines energy efficient components, compute power and high density with expanded memory and I/O for maximum performance. A balanced architecture featuring Quad-Core Intel Xeon processors with expanded cache, fully buffered DDR2 memory, optional Serial Attached SAS or SATA hard drives, support of Multi-Function NICS and multiple I/O cards, the BL460c G5, provides a performance system ideal for the full range of scale out applications.
In this small form factor, the BL460c G5 continues to include more features to ensure high-availability such as optional hot plug hard drives, mirrored memory, memory interleaving, embedded RAID capability, and enhanced remote Lights-Out management.


Product features

Feature
Specification
Processor
Quad-Core Processors
  • Intel Xeon Processor E5450 (3.0 GHz, 1333 FSB, 80W)

  • Intel Xeon Processor L5430 (2.66 GHz, 1333 FSB, 50W)

  • Intel Xeon Processor L5420 (2.50 GHz, 1333 FSB, 50W)

NOTE: Intel 5400 Series processors are 64-bit and support Intel VT. Intel.

For the Intel 5400 Series, the letter preceding the model number indicates the performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.

Upgradeability
Upgradeable to 2 processors
Upgradeable to 2 processors (8 cores) Future upgradeable to Xeon Series 5400/5300 Quad-Core processors (Please contact your regional sales support to determine quad core upgradeability. Some of the earlier shipping models may not support this upgrade). 5100 Dual-Core models are not upgradeable to the 5200 Dual-Core processors.
Cache Memory
2 x 6 MB shared L2 cache (5400 Series)
Chipset
Intel 5000P Chipset
Memory
Type
PC2-5300 Fully Buffered DIMMs at 667 MHz
Standard
2 GB LP (2 x 1 GB)
Maximum
Upto 64 GB of memory, supported by (8) slots
NOTE: This model only supports low power memory. Memory must be installed in pairs.
Network Controller
Two (2) embedded NC373i Multifunction Gigabit Server Adapters with iSCSI boot, TCP/IP offload engine, and optional accelerated iSCSI
One (1) additional 10/100 NIC dedicated to iLO 2 Management
NOTE: The Gigabit Ethernet adapters transmit from the server at 2000 Mbps, full duplex per port only. However, within a Linux environment, the speed can be reduced or "throttled" using a feature available within the Linux operating system.

Once the adapter signal reaches the interconnect within the blade enclosure and communicates outside the blade enclosure to the LAN, the blade interconnect uplink types and settings determine the cable media, speed, duplex mode, and auto negotiation mode. Interconnects are available with Ethernet uplinks supporting 10/100/1000T, 10/100/1000 SFP, 1000 SX fiber, and 10Gb KX-4.

I/O Expansion Slots
Two I/O expansion mezzanine slots (one x8 and one x4)
Integrated Manageability
Integrated Lights-Out 2 (iLO 2) Standard Blade Edition (integrated on motherboard)
Storage Controller
HPE Smart Array E200i Controller
64 MB memory module supports RAID 0,1
Available upgrades: 128 MB with Battery-backed write cache
Maximum Internal Storage
Hot Plug SAS
600 GB
2 x 300 GB Serial SCSI
Hot Plug SATA
500 GB
2 x 250 GB Serial ATA
Graphics
Integrated ATI RN-50 1600x1280x64K 16M color (32 MB DDR1 memory)
Graphics Resolution Supported
Resolution Color Depths
1600 x 1280, 64K, 256, 16
1280 x 1024, 16.7M, 64k, 256, 16
1024 x 768, 16.7M, 64k, 256,16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16


Software overview

Feature
Specification
OS Support
  • Microsoft Windows Server

  • Microsoft Windows Server Hyper-V

  • Red Hat Enterprise Linux (RHEL)

  • SUSE Linux Enterprise Server (SLES)

  • Oracle Enterprise Linux (OEL)

  • Solaris 10 for x86/x64 based Systems

  • VMware

  • Citrix XenServer

Feature
Specification
Integrated Manageability
iLO 2 Advanced for BladeSystem (integrated on motherboard)
  • Graphical Remote Console

  • New iLO Text Console

  • Measure, regulate, and cap server power consumption

  • Automatically captured video footage of last boot sequence

  • Automatically captured video footage of last fault sequence (such as blue screen)

  • On-Demand video recording for training or quality assurance needs

  • Global team collaboration for up to four remote users

  • Virtual media and folders (no ISO or floppy image needed)

  • LDAP integration

  • MS Terminal Services Pass-through

  • Remote Serial Console

  • Virtual Power Button Control

  • Plus all capabilities of iLO 2 Standard Blade Edition

Integrated Lights-Out 2 Standard Blade Edition (iLO 2)
  • Graphical Remote Console

  • Virtual media (single server, browser based access only)

  • Remote Serial Console

  • OS independent hardware health status


Write a review

Note: HTML is not translated!
    Bad           Good
Captcha